ep

February 5, 2021

Why Coupling Grease?
Adequate lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically created for gear coupling applications to improve coupling existence whilst drastically cutting down upkeep time. Its higher viscosity base oil and tackifier mix to help keep the grease in place and stop separation and it’s in complete compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to large centrifugal forces commonly observed in couplings. Bearing or general purpose greases have a tendency to separate and lose effectiveness on account of substantial centrifugal forces to the different ingredients at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil from the thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate within the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is intended to remarkably resistant to centrifugal separation from the oil and thickener, which permits the lubricant for being utilized to get a fairly extended time period of time.
One of many techniques towards the success of Gear Coupling Grease may be the variable consistency throughout the functioning cycle from the application. The consistency of our gear coupling grease adjustments with all the operating ailments. Working from the lubricant below real support conditions causes the grease to turn into semi-fluid, functionally solash lubricating the put on surfaces from the coupling. Because the grease cools, it returns on the unique consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Attributes
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Higher load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place below high speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.