ep

January 4, 2021

one.A connecting website link of an O-ring Chain for standard application is pre-coated with grease on the pins. Before connection, confirm the grease around the surfaces of pins, and should the level of grease is modest, apply grease with bare hands. (If gloves are used, the grease is going to be absorbed from the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots from the pins. If your O-rings come loose as a consequence of vibration throughout transport, refit the O-rings in on the roots of the pins.
In this instance, make sure to return the grease collected on the roots of the pins for the central surfaces with the pins, far more at portion A than at portions B proven from the above illustration. (Portions A is worn on account of sliding together with the bushings.)
2.The chain can be most effortlessly linked over the teeth of a sprocket. Engage the links at both ends with the chain with all the sprocket teeth and fit connecting pins. When the sprocket is often moved, the chain may also be connected within the loosened side.
3. Connecting method
one.Verify that O-rings are connected to your roots on the pins.
two.If your amount of grease utilized about the connecting pins is compact, coat the pins with grease with the central portions.
three.Insert the connecting pins in to the bushings of the inner backlinks at both ends.
4.Verify the grease is applied to your complete encounter from the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and even though pressing the connecting plate, install the spring clip. Confirm no matter whether the head (the end without a split) of the spring clip is turned while in the feeding course of the chain. (See the next illustration.)
six.You’ll want to confirm the spring clip is securely fitted inside the clip grooves of the connecting pins.
This completes jointing from the connecting hyperlink. Note that grease within the surfaces of connecting pins and O-rings might be eliminated all through installation perform. In this instance, re-grease using the grease about the surface from the base chain or even the grease in the polyethylene bag by which the connecting hyperlink was contained.