Any injury over the teeth surfaces of a sprocket diminishes the daily life of your conveyor chain.
With conventional sprockets, considerably worn sprocket teeth have been repaired by teeth padding or the complete sprocket was replaced. In both case, repair was pricey and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our consumers for that dramatic savings in value and time.
Structure
The teeth is usually replaced by two techniques: personal tooth replacement or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on towards the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated about the ideal.
The above photo and also the best ideal illustration demonstrate a sprocket for person tooth replacement. Since the joint face amongst the replaced teeth plus the sprocket is formed within a unique arc, the bonding accuracy is high and the sprocket strength is enhanced. Furthermore, because the load acting over the mounting bolts is decreased, there is much less probability of loosening. This sprocket development is patented.
You will find two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for significant sprockets getting hefty loads and welded sheet steel hubs for other applications.