Material Handling Power UNIT 1
Basic Description
This power unit is developed for the fork lift market, consisting of really productive gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are controlled from the lever in the manual release valve, and that is outfitted with an electrical switch to activate the motor. The lowing speed is managed through the strain compensated flow management valve.
Exclusive Notes
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned just before installation of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and no cost of impurities, N46 hydraulic oil is recommended .
4. Oil changing is needed immediately after the original 100 operation hours, afterwards after each 3000 hrs.
5. The electrical power unit shown is made to be mounted horizontally.

Materials Managing Electrical power UNIT 2
Basic Description
This energy unit features energy up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the lowering pace managed from the stress compensated flow management valve. Merchandise of this series may be extensively used in the field of logistic products such as fork lift, mini lift table, and so on.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned before mounting the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of impurities, N46 hydraulic oil is encouraged .
four. Oil transforming is needed just after the preliminary one hundred operation hrs,afterwards as soon as each and every 3000 hours.
five. The electrical power unit need to be mounted horizontally.